Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Springfield Homeowners
Most chimney problems in Springfield stay hidden until they cause a fire, a water stain, or a drafty fireplace you can’t explain. An inspection is the only way to see what a brush can’t reach: cracked flue tiles, failing joints, a cap that’s lost its seal. Our technicians have up to 9 years of experience and work only on chimneys, so the verdict you get comes from someone who reads flues for a living. We answer 24/7 and book inspections with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 360-8122 to get your Springfield chimney inspected before burning season.
Fireplace Inspection
Fireplace Inspection covers the firebox, damper, smoke chamber, and the flue above it, and it’s what you want before lighting the first fire of the season or after a winter of heavy burning. Springfield has plenty of older masonry fireplaces where the firebox mortar has softened and the damper no longer seats, and neither problem announces itself until smoke backs into the room. We check the firebox brick and joints, test the damper, look for gaps in the smoke chamber, and run a camera up the flue. A fireplace inspection typically runs $150-$350 depending on how much of the system needs looking at. If we find something, we tell you plainly whether it can safely wait until spring.
What’s Checked in the Firebox
We look at the brick face, the mortar joints, and the fireback for spalling or gaps where heat can reach the structure behind. Loose or crumbling joints here get measured and photographed so you can see the same thing we do.
Damper and Smoke Chamber
A damper that won’t close completely lets warm house air escape all winter, and a smoke chamber with rough ridges traps creosote. We test the damper through its full travel and check the chamber walls for gaps that cause smoky starts.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services at Lockhart Chimney Sweep are built around one idea: you should see exactly what we see before anyone talks about repair. We offer all three core services under one roof, sweeping, inspection, and repair, so you’re not coordinating three contractors about a single chimney. Springfield homeowners call us for pre-season checks, post-chimney-fire assessments, real estate transactions, and second opinions after another sweep found “thousands of dollars” of work. Depending on what’s needed, an inspection runs $150-$500, and the written estimate you receive sets the final price. Nothing gets recommended without photo or camera evidence you can review yourself, and we’ll tell you outright when a repair can wait.
Inspection Before You Buy a Home
An older Springfield house can pass a general home inspection and still have a flue that’s unfit to burn in. We look at the liner, crown, cap, and flashing, then give you a straightforward picture of what the chimney needs.

Second Opinions on Repair Quotes
If a quote for relining or masonry work doesn’t come with photos, bring it to us. We’ll inspect the flue with a camera and tell you whether the recommendation matches what’s actually there.

Chimney Flue Inspection
Chimney Flue Inspection is the part of the job that decides whether your chimney is safe to use, because the flue is where heat, creosote, and carbon monoxide travel. We run a camera through the full length of the flue to check tile condition, joint alignment, and any offset or bend that could trap debris or hide damage. This matters in Springfield’s older housing stock, where chimneys were often built for coal or unlined, then adapted for wood or gas without a liner upgrade to match. Flue inspection typically runs $150-$350 as part of a standard visit. If the tiles are sound, we tell you so and the conversation ends there.
Offsets, Bends, and Odd Flue Paths
Many older chimneys don’t run straight up; they jog around a joist or angle toward the ridge. Rigid liners can’t always follow those paths, which is why we work with DuraFlex flexible liner systems when a non-standard flue needs a fix.
Reading the Camera Footage
We walk you through the footage on the spot, tile by tile, and point out what’s normal wear and what’s a genuine gap or crack. You leave the visit knowing what’s in your flue.
Chimney Fire
Chimney Fire damage is often invisible from the ground, and a flue that looks intact outside can have cracked tiles and scorched joints after a creosote ignition, which is why any suspected chimney fire needs a proper inspection before the fireplace is used again. Springfield winters ask a lot of a chimney: long burn seasons, damp wood, and slow smoldering fires all build creosote that can ignite. We inspect the full flue for heat damage, check the smoke chamber and damper, and confirm whether the liner is still sound. Inspection after a chimney fire typically runs $150-$500 depending on damage found. If the flue can be restored without full relining, we’ll tell you that too.
Why a Clean-Looking Flue Can Be Damaged
Creosote ignitions burn hot enough to crack tile even when the soot above and below looks ordinary. The camera is what tells the truth here, not the eyeball from the hearth.
Restoring Tile Without Full Relining
When the damage is caught early, HeatShield resurfacing can restore deteriorated flue tile without a full liner replacement. That’s an option many sweep-only companies simply can’t offer, and it can save real money when the timing works.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the thorough inspection called for when something changes: a new appliance, a property sale, a chimney fire, or a flue problem a basic check can’t explain. It covers everything a visual check does plus a full camera scan of the flue, and it’s the inspection you want if you’ve switched to a wood insert, added a gas appliance, or bought the house recently. We also check the chimney exterior, crown, flashing, and attic penetrations so the whole system gets looked at, not just the pipe. A Level 2 inspection typically runs $250-$500 in Springfield depending on access and roof conditions. You get a written report with photos.
When a Level 2 Is Needed
Bought the house recently, changed the appliance, or had a chimney fire? Those are the triggers. It’s also the right call when a basic inspection leaves a question unanswered.
Access, Roof, and Attic Work
Some of this inspection happens on the roof and some in the attic, where flashing leaks and gaps around the chimney show up first. We plan access carefully and document what we find in both places.
Chimney Leak
Chimney Leak problems almost always start at the top: a cracked crown, failed flashing, or a cap that’s no longer sealed, and the water shows up far from the source as a stain on the ceiling or a musty smell near the hearth. Springfield’s freeze-and-thaw cycles work on masonry year after year, opening hairline cracks that widen as water gets in and freezes. We trace the leak to its actual entry point rather than guessing, checking the crown, flashings, brick joints, and cap. Leak diagnosis and repair typically runs $150-$500 for inspection and minor fixes, with the written estimate setting the final price. We’ll show you photos of the failure before recommending work.
Crown, Flashing, and Cap Failures
The crown takes the most weather and cracks first; flashing fails where the roof meets the chimney. We check both, plus the cap, since a Gelco or Famco cap that’s rusted out lets water straight down the flue.
Water Damage That Can Spread
Water inside a chimney rusts dampers, weakens mortar, and can stain interior walls well away from the fireplace. Catching it at the crown is far cheaper than repairing the damage below.
Chimney Camera Inspection
Chimney Camera Inspection uses a video camera run down the flue so we can see tile joints, cracks, offsets, and creosote buildup that no flashlight from the firebox can reveal. We recommend it whenever there’s a draft problem, a chimney fire history, a recent liner question, or a repair quote you can’t verify. Camera inspection typically runs $150-$350 as part of a standard service visit. The footage is the evidence, and you see it with us, not after the fact. If the flue is clean and the tiles are sound, you’ll know that too, and you won’t be sold anything you don’t need.
What the Camera Reveals
Missing mortar joints, gaps at tile seams, and cracks too fine for an eye at the firebox all show up on camera. So does the creosote layer itself, in glaze or crust form.
Footage You Can Keep
We record the scan so you have a record of the flue’s condition on the day we looked. That’s useful if you’re buying a home, selling one, or just want a baseline before next season.
Brands We Service
We work with professional-grade product lines, and knowing them changes what we can recommend. DuraFlex flexible liner systems are our choice for flues with offsets or bends that rigid liners can’t follow. HeatShield resurfacing lets us restore flue tile that’s failing at the joints without automatically jumping to full relining. Olympia Chimney liners, Gelco and Famco caps, and Copperfield components round out the portfolio, so the fix we specify is matched to the chimney in front of us, not to whatever’s on a shelf.
We’re a chimney specialist, not a general contractor, so every job and every recommendation comes from concentrated chimney knowledge. We don’t claim to be a dealer for any of these makers; we simply know how their products perform and when they’re the right answer. Whether you have a DuraFlex system already, a HeatShield-resurfaced flue, Olympia or Gelco components, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Strong smoky smell in the house, even when the fireplace is cold. That odor usually means creosote or moisture is sitting in the flue. It’s a signal to get the chimney looked at before the next fire.
- Smoke rolling back into the room when you light a fire. A blocked flue, a failing damper, or a pressure problem can all cause it. Backdraft sends smoke and carbon monoxide indoors, so don’t keep burning until it’s checked.
- Water stains on the ceiling or walls near the chimney. Staining points to a leak at the crown, flashing, or cap. Left alone, water rots framing and rusts the damper.
- Crumbling mortar or missing bricks on the chimney exterior. Loose masonry is a sign the chimney is taking on water and freezing. It can also mean the crown has failed and the structure is next.
- A dark glaze inside the firebox or flue. Glazed creosote is the kind that ignites, and it doesn’t brush out like soot. A camera inspection tells you how far it goes.
Our Process, Step by Step
- 1
Listen first. We ask what you’ve noticed: smells, drafts, stains, smoke, how often you burn. That history points us to the right places to look and saves time on the visit.
- 2
Camera scan of the full flue. We run the inspection camera from the top of the flue or the firebox, checking tile joints, offsets, and buildup the whole way up.
- 3
Exterior and attic check. On the roof we look at the crown, cap, and flashing; in the attic we check penetrations and signs of water. The chimney is one system and gets treated that way.
- 4
Show you what we found. We point out specific conditions on the footage and photos, and explain what each one means. We also tell you what’s fine and can be left alone.
- 5
Written estimate, only if work is needed. If something needs fixing, you get a written scope and price. Nothing gets booked without your go-ahead, and you’re free to take the report and think about it.
How Much Does Chimney Inspection Cost in Springfield?
Chimney inspection in Springfield typically ranges from $150 to $500 depending on the level of inspection and what needs looking at. A standard visual and camera inspection of a straightforward flue runs $150-$350. Start adding conditions and the scope grows: an odd flue path, a chimney with known fire history, a home purchase requiring a Level 2 inspection, or an exterior that needs a close look can push a thorough inspection into the $250-$500 range. Those figures are typical estimates, not final prices. The written estimate you receive sets the final price for your chimney.
What affects the price most is scope, not urgency. A basic check on a clean flue is quick; a full Level 2 with roof and attic access takes longer. Accessibility matters too; a chimney with a steep roof or awkward cap takes more care to inspect properly. We don’t charge a separate service-call fee, and a free estimate means you’ll know the cost before work begins. The best way to avoid overpaying is to ask for the camera evidence behind any recommendation. Nothing we suggest comes without photos and footage you can review, and we’ll tell you plainly when a problem can wait until spring. Call (855) 360-8122 for an exact quote; estimates are free.
Our Service Area Near Springfield
We inspect chimneys throughout Springfield and the communities around it, including Chicopee, West Springfield Town, Agawam Town, Longmeadow, Holyoke, Westfield, Wilbraham, Belchertown, and Fiskdale. Each of these towns has its own housing stock, from older masonry chimneys to newer inserts, and we tune the inspection to what’s typical there. If you’re in or around Springfield, Wilbraham, or Belchertown, we can get an inspection booked before burning season. If you’re not sure whether your town is covered, call and ask.
Serving Springfield, MA – Our Local Coverage Area
We serve Springfield and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Springfield
A chimney inspection is a documented check of the entire chimney system: firebox, damper, smoke chamber, flue, crown, cap, and flashing. It confirms whether the chimney is safe to use and identifies damage or blockages before they cause a problem. We combine a visual review with a camera scan of the flue. You get a written report and photos of what we found.
A standard inspection usually takes about 45 minutes to an hour and a half. A Level 2 inspection with full roof and attic access can take longer, often closer to two hours. Access and the condition of the chimney affect timing. We’ll give you a realistic window when we book.
Most chimney inspections in Springfield run $150-$500, with a standard inspection typically $150-$350 and a Level 2 inspection $250-$500. The written estimate sets the final price. Call (855) 360-8122 for an exact quote; estimates are free.
Yes. We work with DuraFlex flexible liners, HeatShield resurfacing, Olympia Chimney liners, and Gelco and Famco caps, and we inspect chimneys that use them. That matters because the fix we recommend matches how the flue was actually built. Whether you have one of these systems or another make, we can help.
Same-day bookings are often possible. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 360-8122 and we’ll find a slot that works.
The inspection itself is a documented service, and any repair we recommend comes with a written scope and estimated price agreed before work begins. We don’t publish a blanket warranty, so ask for the terms that apply to your specific job. You’ll know exactly what’s covered before you book.
Clear the area around the fireplace so we can work and set up the camera. If you have gas or wood inserts, let us know their make and any recent service. Have your questions ready; we’d rather answer them on the visit than have you guess.
Schedule Your Chimney Inspection Service in Springfield Today
Book a chimney inspection in Springfield with Lockhart Chimney Sweep and get a straight answer about what’s in your flue, backed by camera footage and photos you can see for yourself. We’ll tell you if a fix can wait, and if it can’t, you’ll get a written estimate before any work is booked. Our technicians have up to 9 years of experience, and we work only on chimneys. Call (855) 360-8122 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lockhart Chimney Sweep.